I created the project,
flashed the firmware,
configured the node in station,
bound to the AP (I can ping it)
set the node id.
on ESP side this is the output
NodeLua 1.0.20141219 (With liblua 5.1.5) Copyright (C) 2014 NodeLua.org free mem=32912
Node:<whatever, matching the project node id>
I set the node as debug in the project
now if I try to start my “hello world” the result is “Your Node is offline, you may need to reset it manually. If you are running it for the first time, please follow the instructions here”
You noticed that problem:) It’s because I’m still working on the control routing from your browser to Node. Will be fixed in the next release. For now, you need to reset the Node manually after clicking “Save & Run” 😉
I have set wifi ssid password, and nodeid.
Now in serial terminal im getting :
NodeLua 1.0.20150120 (With liblua 5.1.5) Copyright (C) 2014 NodeLua.org free mem=31856
[W] loading lua code from WebIDE!
connected! IP: 192.168.43.4
But in WebIDE, it is showing Debugging node is offline. And in nodes it is showing not activated.