Problem after firmware flash Home › Forums › NodeLua firmware › Startup › Problem after firmware flash Tagged: flash erase empty This topic contains 1 reply, has 1 voice, and was last updated by tita2000 3 years, 11 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts April 16, 2015 at 1:37 am #475 tita2000Participant Hi there. This is the first time using esp8266 for me. So I tried the nodelua firmware to get a start. The flashing went fine, but all the console saying after rebooting is: NodeLua 1.0.20150120 (With liblua 5.1.5) Copyright (C) 2014 NodeLua.org free mem=31856 [W] loading lua code from WebIDE! connecting… …..Node:ed9277c9cb636e476188b5676300cbd4ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ88ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ connected! IP: 192.168.100.192 So, it seens the board is connected somehow and there is a node running but not mine?! Is there something like a whole reset, a complete erase? Thanks Timo April 16, 2015 at 1:53 am #476 tita2000Participant Ok, solved myself: 1. cut off wlan completely 2. reboot esp8266 3. wait for ‘>’ 4. set new node id Done. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.